FunnyPlaying's - LED Buttons
2 min
FunnyPlaying LED Button GBC Kit Navigation Instructions
To navigate and control the LED settings on the FunnyPlaying LED Button GBC kit, follow these detailed steps:
To cycle through the different modes, you'll have to:
Press and hold the A + B buttons for 2 seconds.
Choose a Mode
- Loop Color LED Mode
- To control brightness: Press START + A/B.
- The settings will autosave.
- To control saturation: Press START + SELECT + A/B.
- The settings will autosave.
- Turn Off LED
- To turn off the power-on effect: Simply select this option.
- The settings will autosave.
- Breathing LED Mode
- To control saturation: Press START + SELECT + A/B.
- The settings will autosave.
- Multi-Color Mode
- To select a single LED: Press SELECT + A/B.
- To control the color of the selected LED: Press START + A/B.
- To exit and save: Press SELECT + L + A/B.
- To control brightness: Press SELECT + A/B.

If you have any issues understanding these instructions, please follow the flowchart attached below, it should help you effectively navigate and adjust the LED settings on your FunnyPlaying LED Button for GBC.

Image Provided by FunnyPlaying