---
title: RetroGlow - LED Buttons
slug: retroglow-led-buttons
createdAt: 2024-05-17T11:15:13.179Z
---

## RetroGlow User Guide&#x20;

:::hint{type="danger"}
📝 This guide is for **NDSL, GBA SP, GBA, and GBC&#x20;**&#x73;ystem&#x73;**.&#x20;**
:::

:::hint{type="info"}
On GBA SP, you can hold Select and press Left in default mode to change the IPS kit brightness.
:::

### Section 1

You can cycle through several modes in this kit. Navigation through the menus is done by **holding SELECT and pressing left ⬅️or right ➡️**on the D-PAD. You will know you’ve entered a menu when you see the LEDs blink twice. Here are the different menu options with their respective controls, in order:

&#x20;1\. **Default Mode**

- No other controls

2\. **Brightness Mode**

- **Press left ⬅️or right** ➡️to adjust the brightness level

3\. **Color Mode Selection**

- **Press left ⬅️or right** ➡️to change the color mode

4\. **Color Mode Edit**

- See [section 2](https://wiki.moddedhandhelds.com/retroglow-led-buttons#CH8R5) for details.

5\. **Save All Settings**

- No other controls. Entering this menu will save all selections and reboot the LED controller.

### Section 2

In **Color Mode Edit**, the controls and options will change depending on which color mode you have selected. See the table below for descriptions of each mode and the different customization options available.

- **User Preset Mode** - Pick a unique color for each button or power LED.
  - &#x20;**Press SELECT once** to toggle between <u>*BUTTON SELECT*</u>, <u>*HUE SELECT*</u>, and <u>*SATURATION SELECT*</u>.
  - In <u>*BUTTON SELECT*</u>, **press left ⬅️or right ➡️&#x20;**&#x74;o change which button you would like to edit.&#x20;
  - In <u>*HUE SELECT*</u>, **press left ⬅️or right** ➡️to change the hue.
  - In <u>*SATURATION SELECT*</u>, **press left** **⬅️or right ➡️** to change the saturation.


- **Fairy Color Mode&#x20;**- Twinkles each button and make it look magical! Or so says Mitch.&#x20;
  - **Press SELECT once** to toggle between <u>*SPEED SELECT*</u>, <u>*SATURATION SELECT*</u>, and <u>*HUE SELECT*</u>.&#x20;
  - In <u>*SPEED SELECT*</u>, **press left&#x20;**⬅️**or right** ➡️to adjust the fade speed.&#x20;
  - In <u>*SATURATION SELECT*</u>, **press left ⬅️or right**➡️to change the saturation.&#x20;
  - In <u>*HUE SELECT*</u>, **press left ⬅️or right➡️** to change the hue.&#x20;


- **Rainbow Color Mode&#x20;**- Fades between all colors and repeats.&#x20;
  - **Press SELECT once&#x20;**&#x74;o toggle between <u>*SPEED SELECT*</u> and <u>*SATURATION SELECT*</u>.
  - In <u>*SPEED SELECT*</u>, **press left ⬅️or right➡️** to adjust the fade speed.
  - In <u>*SATURATION SELECT*</u>, **press left ⬅️or right➡️** to change the saturation.&#x20;

- **Solid Color Mode** - Display one color across all LEDs.&#x20;
  - **Press SELECT once** to toggle between <u>*HUE SELECT*</u> and <u>*SATURATION SELECT*</u>.
  - In <u>*HUE SELECT*</u>, **press left⬅️ or right➡️** to change the hue.&#x20;
  - In <u>*SATURATION SELECT*</u>, **press left⬅️ or right➡️** to change the saturation.&#x20;


:::hint{type="success"}
To save all settings, **hold SELECT and press right ➡️**
:::



![](https://lh7-us.googleusercontent.com/clGuhf203mAJdK8zlJL-r9KtR6-jVLRhLmJvgaB8w3lgEQb4KiN-OFL2cH7P8QDJbJOrTTbvEyp1XX2mz2Z_xOdblbkzyqurO85Ci53H0obCchs8I7LQm8aejqeVxOH46AICZNnz-VlSNQ2hzo6V0f8 "Image Guide provided by HandheldLegend.com")



If you have any questions or would simply rather watch a video explaining the features and navigation of the RetroGlow board, please check out either of these YouTube guides by HHL, the official distributor of RetroGlow: [Guide 1](https://www.youtube.com/watch?v=9Yx8uml94C0) and [Guide 2](https://www.youtube.com/watch?v=viH8y9QnynM).&#x20;



::embed[]{url="https://www.youtube.com/watch?v=9Yx8uml94C0"}

