---
title: FunnyPlaying's - LED Buttons
slug: funnyplayings-led-buttons
createdAt: 2024-05-23T03:47:40.678Z
---

## FunnyPlaying LED Button GBC Kit Navigation Instructions

To navigate and control the LED settings on the FunnyPlaying LED Button GBC kit, follow these detailed steps:

**To cycle through the different modes, you'll have to:**

:::hint{type="danger"}
**Press and hold the A + B buttons for 2 seconds.**
:::

**Choose a Mode**

1. **Loop Color LED Mode**
   - To control brightness: Press **START + A/B**.
     - The settings will autosave.
   - To control saturation: Press **START + SELECT + A/B**.
     - The settings will autosave.
2. **Turn Off LED**
   - To turn off the power-on effect: Simply select this option.
     - The settings will autosave.
3. **Breathing LED Mode**
   - To control saturation: Pres&#x73;**&#x20;START + SELECT + A/B**.
     - The settings will autosave.
4. **Multi-Color Mode**&#x20;
   - To select a single LED: Pres&#x73;**&#x20;SELECT + A/B**.
     - To control the color of the selected LED: **Press START + A/B**.
       - To exit and save: Pres&#x73;**&#x20;SELECT + L + A/B**.
   - To control brightness: Press **SELECT + A/B**.



If you have any issues understanding these instructions, please follow the flowchart attached below, it should help you effectively navigate and adjust the LED settings on your FunnyPlaying LED Button for GBC.&#x20;

![](https://api.archbee.com/api/optimize/hXCeUOgfFbz6apWEL4Rjf/YnYZWXFjz8Wo_LIg8PGh-_funnyplaying-gbc-led-button-board-guide.png "Image Provided by FunnyPlaying")

